Cross DJ

 [Features] Difference between MT (Mastertempo) and Hybrid
Master Tempo tries to keep the pitch, no matter how much you change the speed. This leads into weird sound effects with bigger changes of speed.
If you want to keep a natural sound, use Hybrid-mode.
This mode allows the algorithym to change the pitch of the song when +/- 33% are over gone. Watch this video for more information

 [Features] Other possibilities to control Cross DJ
Keyboard: In the settings, you can assign Cross functions to any keyboard buttons.
Mouse: Almost all important functions of Cross found their way on the GUI. This means you can use the mouse on them. For any faders and rotary faders, use the mouse wheel on them. Double click resets the fader (might mean: maximum, minimum or centre, depending on the function). Have a look at the little LEDs at the rotaries of the channel strips, those are switches.”

 [Features] Quantize & Snap
Quantize locks the grids of all running “slave“ players (even samplers) with the grid of the master.
Snap optimizes your timing by locking your actions (for example: loops, some effects like “roll“) to the significant divisors of the beatgrid. If the divisor is set to “1“ it locks right on the grid bars. If it is set to “1/2“ it set on the grid bars or in the middle between.

 [Licence & Downloads] Add your serial number in the forum
  • Step 1: Sign into the forum or create a user to sign into the forum.
  • Step 2: On the right hand side of the forum, under board index, click on “user control panel”.
  • Step 3: Click on profile.
  • Step 4: Put in your serial number.

 [Licence & Downloads] Updates/Download
Once you have registered your licence key on the forum, you can download the software AND the updates. You will find all the software and updates here.

 [MIDI] Compatible MIDI controllers
Find the list of all compatible controllers here.
Cross DJ knows how to deal with MIDI-compatible controllers. You can teach Cross to work with nearly every controller on the market in addition to the preset controllers. To obtain the LEDs of working controllers, you should give Cross MAP a try to simple programming. If you use Cross full version, you can also use HID in combination with most PIONEER CDJs. HID means a perfectly fast reaction, as if playing a CD. And there are plenty of data sent to the player so even the displays are working for Cross.
Add more controllers, Cross can handle up to 8 MIDI-controllers. You can use the same model more than once.

 [MIDI] Insert a mapping
Go to “Preferences” > “MIDI” > “Insert Mapping” (lower left-hand corner)
Mapping problem: Please submit your issue as precisely as possible on the forum.

 [MIDI] Why is my MIDI controller not detected?
We advise you to send the Vendor ID and Product ID of your MIDI controller to support@mixvibes.com
For Mac:
1. Plug the MIDI controller to your Mac.
2. On the top Left corner, click on “About This Mac”, “System Report”, “USB”.
3. Select the device and get “Vendor Id” and “Product Id”.
For PC :
1. Plug the MIDI controller to your PC.
2. Open the Control Panel, Printers and devices, Select your controller.
3. Click on Properties, Tab Details, and display the property “Hardware IDs”.

 [Performance] Audio collection from an external driver
Plug your driver, the collection will automatically appear in Cross as “files.tab”.

 [Performance] Beatmatcher is running too fast
At the right side in the beatmatcher, you can set the zoom-level of this display according to your needs. The more you zoom out, the slower it will move. Sliding it upwards zooms out.

 [Performance] Cross DJ Mac/PC crashed
Sending us a crash report, along with a description of the context of the crash (Cross version and usage scenario that led to the crash) will help us fix and make Cross the perfect software. Crash reports can be found in the following places:
PC: Type Windows+R (that is hold the windows key and press R) and type AppData, followed by enter. This will open an explorer window in the hidden folder “AppData”. Navigate through “Roaming” > “MixVibes” > “Crashes”. From there you will find the crash dumps useful for debugging. Locate, by date, the one related to the crash you want to describe. This is the file you need to send us. Note that this file is not a text file and can’t be opened (usefully) by anyone than us.
Mac: When Cross crashes on Mac, a popup window stating the program closed appears. This popup window has a “Report” button. Once clicked, you should copy/paste the whole crash report (all the text) and send it to us.

 [Performance] Deal with audio dropouts
A lower latency makes your experience of playing music with your computer better. But a latency that is too low causes sound artifacts. Latency depends on the individual computer. Set it as low a possible without getting any clicks or dropouts.

 [Performance] No sound but the waveform is running
You might have used the “Brake“ effect before and forgot to release it. The effect only has influence on the sound but not on the graphics. Release the effect and your music should play again.
You might accidentally have slided the crossfader to the opposite side and cut the sound this way. If you don’t need the Crossfader, you can switch it off for each deck to avoid issues. Therefore you simply click on the according letters beside the Crossfader.
Check if you didn’t switch to “Line in“ (Only Player A and B). In case you did there is a big sign in the waveform. You can switch back if you click on the letter on top of the according channel strip in the mixer section.

 [Performance] No sound when cueing on the headphones
Dual-stereo mode: Make sure that the “Mix”-control in the top line of the display is not turned to the maximum clockwise. In this case you will only hear the master output in your headphones.
Single-stereo mode: Switch output mode to Dual-stereo.

 [Performance] Some tracks remain hidden from the searching
Click on the spyglass in the left corner of the searching field and check “More Parameters”. Or just in case: click “all“.

 [rekordbox] Import libraries from third party software
Cross DJ can import full collection from Traktor (nml. files) and Virtual DJ, Go to: – File > Import Third Party Database.

 [rekordbox] Locators in Cross DJ converted to rekordbox™
– Cross DJ offers 8 locators per track. rekordbox offers 3 hot cues and 10 memory points.
– The 8 locators are converted to memory points. Additionally, locators 1, 2, 3 are converted to hot cues A, B, C. Locators loops are also taken into account.

 [rekordbox] Recommended worflow with rekordbox sync
– For users wanting to use rekordbox™ sync, the ideal is to prepare music in Cross DJ.
– rekordbox should only be used to export the prepared music to USB devices.
– To sync many playlists, we recommend to create a playlist folder in Cross DJ, and import that folder in rekordbox’s collection each time you open it.

 [rekordbox] rekordbox sync and Cross DJ
Your Cross DJ collection is accessiåble inside rekordbox™. Sync hot cues, grids, metadata and playlists,it is located in the Bridge pane, right below the iTunes collection.
The full collection can be browsed and played in rekordbox™. All playlists, folders and smartlists will be there. All track properties are there (ID3 tags and more). All locators are there.
Tracks and playlists can be exported directly to a USB device.
They can also be imported in rekordbox’s collection.

 [rekordbox] Set up rekorbox sync and Cross DJ
You need both software
– step 1: Install the latest version of rekordbox™.
– step 2: In Cross DJ, go to Help > rekordbox™ sync tutorial.
– step 3: Copy the XML path.
– step 4: In rekordbox™, go to files > Preferences > Bridge > rekordbox™ XML.
– step 5: Paste the XML path in “Imported Library”.

 [rekordbox] Sync from rekordbox™ to Cross DJ
At the moment, the sync is just from Cross DJ to rekordbox™. It’s possible to import your rekordbox™ collection in Cross DJ. In rekordbox™, go to: – File > Export Playlists Information. An xml file is created. In Cross DJ, go to File > Import Third Party Database, and choose the xml file you just created.

 [General] Can I connect an external soundsystem to my device?
Yes, with an external sound card plugged into your iOS device.

 [General] Can I mix with music from Google Play Music?
The tracks bought through Google Play Music are not accessible from any app. This is a limitation from Google due to licensing issues.
The only way to have access to your music is to download the tracks to your Mac/PC and upload them back to your Android device.

 [General] How can I edit the beatgrid?
This feature is only available in Cross DJ Pro. To edit the beatgrid:
1. Go to advanced settings and turn “Beatgrid Edition” mode on.
2. In the Turntable view, tap on the waveform icon on the left.
3. Tap on the Beatgrid icon and edit it as you want.

 [General] How do I add songs in Cross Dj?
Cross DJ allows you to play and mix the music tracks that you have in your device. You can import songs to your device using softwares like iTunes.
To play songs from iCloud / iTunesMatch, go in the Music app and tap the cloud icon next to the song you want to download. This requires an internet connection.

 [General] How do I change the colors of the players?
If you wish to change the colors of the players:
1. Go to “Advanced Settings”.
2. In “Colors”, select the player to edit (A or B).
3. Choose the color you want for your player.

 [General] What is Cross DJ?
Cross DJ is the best pro DJ app on iOS. It allows you to mix tracks in perfect sync on a powerful audio engine. Cross DJ has been engineered by Mixvibes, digital DJing pioneer for 15 years.

 [General] Which Android versions is Cross DJ compatible with?
Cross DJ is compatible with Android 4.1 and above.

 [General] Why can’t I access the vertical view?
By default, Cross DJ runs in landscape mode. So if a lock rotation is detected, you will have the landscape view automatically. If you wish to change this:
1. Quit the app.
2. In the settings of your device, turn the automatic rotation on.
3. Start the app again.

 [Import/Export] How do I export mixes?
To export a mix, you can directly use the “Share” button or you can export it to your computer using the device’s file manager. To do so:
1. Go to your device’s file manager.
2. Go to your “Music” directory.
3. You will find your recordings in the “CrossDJRecords” directory.

 [Import/Export] What are the possible extensions of the tracks I want to import?
The supported formats for the import of tracks are all the supported by iTunes (MP3, MPEG4 Audio (AAC), AIFF, WAV, Apple Lossless and WMA)

 [Import/Export] What format will the exported tracks be in?
With Cross DJ, your mixes will always be recorded in MP4 (AAC) format.

 [Import/Export] What kind of file formats can I import in Cross DJ?
The supported formats for the import of tracks are the following: MP3, AAC, FLAC, WAV, OGG and WMA.

 [Import/Export] What will be the extension of the files I export?
With Cross DJ, your mixes will always be recorded in MP4 (AAC) format.

 [MIDI] How can I get a powered USB hub?
You can purchase a powered USB hub in a store or on Internet. For example: http://www.amazon.com/Belkin-Hi-Speed-USB-7-Port-Lighted/dp/B000SDW84K

 [MIDI] How can I i connect my MIDI controller to the app?
To connect your MIDI controller to the app:
1. Plug your OTG cable to your Android device.
2. Plug your OTG Cable to your powered USB hub.
3. Plug your controller to your powered USB hub.
4. You should have the message: “Connection to ‘name of your controller’ succeed!”
For further information on the process, watch this video: https://www.youtube.com/watch?v=KRP_Cy3jQM4

 [MIDI] Which MIDI controllers is Cross DJ Android compatible with?
There are 6 controllers compatible with Cross DJ on Android:
– MixVibes U-Mix Control
– MixVibes U-Mix Control 2
– MixVibes U-Mix Control Pro
– MixVibes U-Mix Control Pro 2
– Pioneer DDJ SB
– Pioneer Wego 2

 [MIDI] Why is there no sound coming from my device when connecting controller?
When connecting a USB controller with audio outputs, Android automatically roots the audio signal to this external output. The sound now comes from controller outputs.

 [Pre-Cueing] How can I get a split cable?
You can purchase a split cable in a store or via a website. For example: http://www.amazon.com/STEREO-3-5mm-PHONE-1-TIP-1-RING/dp/B000068O5E/ref=sr_1_11?s=electronics&ie=UTF8&qid=1436346301&sr=1-11&keywords=split+mono+cable

 [Pre-Cueing] How do I use Pre-Cueing?
If you are using the free version of Cross DJ, you first need to purchase the “External Audio Connection” in-app to pre-Cue your mix with headphones. This feature is included in the full version.
1. Plug your split cable:
2. Go to the advanced settings and set the “Audio Output Mode” to “Split” if you use a split cable or to “Dual” if you use an external soundcard.
3. Go to the “Settings” pannel and use the “Mix-Cue” button to set what you want to hear in your headphones (Mix is the master, Cue is the track you selected).
4. Go to the EQs pannel and press the little headphone logo of the track you want to pre-Cue.

 

 [Pre-Cueing] Split Cable
You can purchase a split cable in a store or via a website. For example: http://www.amazon.com/STEREO-3-5mm-PHONE-1-TIP-1-RING/dp/B000068O5E/ref=sr_1_11?s=electronics&ie=UTF8&qid=1436346301&sr=1-11&keywords=split+mono+cable

 [Pre-Cueing] What is Pre-Cueing?
The “Pre-Cueing” feature allows you to preview songs through headphones independently from the mix that goes through the main speakers.

 [Pre-Cueing] Why is my split cable not working?
Make sure that what you have is a Stereo to Mono Splitter and not a DJ Split Mono cable.
– a Stereo to Mono Splitter sends the left channel on output 1 (duplicated on left and right) and the right channel on output 2 (duplicated on left and right).
– a DJ Split Mono cable is a 1 Stereo to 2 Stereo Splitter. This only duplicates the stereo signal on both outputs.
For more help: http://forum.mixvibes.com/viewtopic.php?f=395&t=31305

 [Recordings] How do I rename or delete a recorded mix?
To rename or delete a mix you recorded, go to Settings. Then, tap on the three bars by the “Record” button and select your mix.
– If you want to rename it, choose “Edit” and tap on its name
– If you want to delete it, tap on “Delete”.

 [Recordings] How do I share my mixes?
To share do so:
1. Go to Settings.
2. Tap on the three bars by the “Record” button.
3. Select the mix you want to share.
4. Tap on “Share” and choose where you want to share it.

 [Recordings] How do I share my recordings?
If you want to share a mix you recorded:
1. Go to Settings.
2. Tap on the three bars by the “Record” button.
3. Select the mix you want to share.
4. Tap on “Share” and choose the sharing platform.

 [Recordings] Where can I find my recorded mixes?
To find the list of the mixes you recorded:
1. Go to Settings.
2. Tap on the three bars by the “Record” button.

 [Recordings] Why am I facing recording problems?
If you are using the free version of Cross DJ, you first need to buy the In-App Purchase “Recording”. This feature is included in Cross DJ Pro.
If you want to find your recordings in your device:
1. Go to your device’s file manager.
2. Go to your “Music” directory.
3. You will find your recordings in the “CrossDJRecords” directory.
If you can’t read the file:
1. Go to “Advanced Settings”.
2. Check “Record Type”: change it from MP4 to Ogg.
3. Reboot the app and try to record again.

 [Recordings] Why can’t I upload my mix to Soundcloud?
You can face difficulties when uploading a mix to Soundcloud. There can be various reasons:
– Copyright infringement with the music used in your miw: please check the terms and conditions of use of Soundcloud here: https://soundcloud.com/pages/copyright
– Try again to upload your mix without cover (covers can sometimes be too heavy)

 [Recordings] Why can’t I upload my mix to Soundcloud?
You can face difficulties when uploading a mix to Soundcloud. There can be various reasons:
– Copyright infringement with the music used in your miw: please check the terms and conditions of use of Soundcloud here: https://soundcloud.com/pages/copyright
– Try again to upload your mix without cover (covers can sometimes be too heavy)

 [Samples] Can I add my own samples to Cross DJ?
The app provides no way to do this. However, we have a topic on our forum about it. Check it on http://forum.mixvibes.com/viewtopic.php?f=395&t=33440

 [Samples] Can I record samples?
Yes, to do so:
1. Open the Samples’ tab.
2. Tap on “Rec” next to the Samples’ tab button to start recording.
A new samples’ bank has been created.
3. Tap a pad when you want to save a sample.
4. The recording is still on so you can directly tap another pad to save another sample.
5. When you are done recording, tap again on “Rec”.

 [Samples] How do I move, rename or delete a sample?
To move, rename or delete a sample:
1. Open the Samples’ tab.
2. Tap on “Edit” next to the Samples’ tab button.
– To rename a sample, tap on its name.
– To delete a sample, tap on the X on it.
– To move a sample, tap on its top left corner and drag it onto another sample.
3. When you are done recording, tap again on “Edit”.

 [Samples] How do I quantize my samples?
To add quantization to your samples:
1. Go to “Advanced Settings”.
2. In “General Options”, select “Quantize”
3. Choose the quantization you want for your samples.

 [Tips] How can I easily reset the value of a slider or a knob?
To reset the value of a slider or a knob, just double-tap it.

 [Tips] How can I make a roll effect?
To make a roll effect:
1. Go to the FX tab and tap on “Slip”.
2. Press one of the “Beat repeat” pads.
3. Swipe to the others “Beat repeat” pads to decrease or increase the number of beats to be repeated.
 [Tips] How can I retrieve In-App Purchases I previously bought?
If you lost your In-App Purchases or if you are asked to pay for In-App Purchases you already paid for:
1. Make sure you are connected to the Internet, and that you are logged-in with the Play Store account that you used to buy the In-App Purchases.
2. Open the Store inside Cross DJ Free.
3. Tap the “Restore” button (top left).
4. If this doesn’t work, you would likely need to “buy” these IAPs again. As long as you are connected with the same account, you won’t be charged again for them.

 [Tips] How do I close Cross Dj?
To close Cross DJ, tap on the “Recent Apps” button of your device and remove Cross DJ from the list.

 [Tips] What does “Keylock” mean?
The “Keylock” feature allows you to fix the pitch of a track while altering the tempo. For example, the tune won’t go deeper if you slow it down.

 [Tips] What does “Quantize” mean?
Quantize your samples to be sure they start and end on the beat.

 [Tips] What is the “Beatmatcher”?
The “Beatmatcher” feature allows you to see the alignment of the track’s beats. It can be visible when clicking on the top center button.

 [Tips] What is the use of the “Keylock” feature?
The “Keylock” feature allows you to fix the pitch of a track while altering the tempo. For example, the tune won’t go deeper if you slow it down.

 [Tips] What is the use of the “Quantize” feature?
Quantize your samples to be sure they start and end on the beat (in sync).

 [Tips] What should I do when I face performance issues?
If you are experiencing performance issues, try to:
– Close other apps running in background.
– Deactivate the Keylock and Quantize features if you do not use them.
– Pre-analyse your library (tap ‘Analyse’ in the library, top right). It’s a CPU intensive task, and it’s better if done before you start your mix.
– Turn Wi-Fi / Bluetooth off to save battery.

 [Tracks] Can I sort my library by key or by BPM?
Yes, you can:
1. Go to your library.
2. On the top right, next to “Analyze”, tap on “Title”.
3. Above your tracks’ list, select the parameter you want to sort your library by (Title, Artist, BPM, Key, Duration)

 [Tracks] How do I rate tracks & playlists?
On Android, you can’t rate tracks. However, you can choose the order of your playlist. To do so:
1. Create a playlist.
2. Use the “Edit” button to remove and move tracks in your playlist.

 [Tracks] Why can’t I find some of my tracks?
Sometimes, when a new media is added to an Android device (an SD card for instance), the tracks are not detected right away.
To find your tracks manually, go to the Folders tab and press the scan button (do not do this on a root directory because it will scan every sub directories and every files and it can take a very long time).

 [Tracks] Why can’t I seek on a track or load a track?
It seems you have the “Protection” mode on. To deactivate it:
1. Go to Settings and select Advanced Settings
2. Turn off the “Protection (Seek and Load)” parameter.

iOS

 [General] Can I connect an external soundsystem to my device?
Yes, with an external sound card plugged into your iOS device.

 [General] Can I mix with music from Google Play Music?
The tracks bought through Google Play Music are not accessible from any app. This is a limitation from Google due to licensing issues.
The only way to have access to your music is to download the tracks to your Mac/PC and upload them back to your Android device.

 [General] How can I edit the beatgrid?
This feature is only available in Cross DJ Pro. To edit the beatgrid:
1. Go to advanced settings and turn “Beatgrid Edition” mode on.
2. In the Turntable view, tap on the waveform icon on the left.
3. Tap on the Beatgrid icon and edit it as you want.

 [General] How do I add songs in Cross Dj?
Cross DJ allows you to play and mix the music tracks that you have in your device. You can import songs to your device using softwares like iTunes.
To play songs from iCloud / iTunesMatch, go in the Music app and tap the cloud icon next to the song you want to download. This requires an internet connection.

 [General] How do I change the colors of the players?
If you wish to change the colors of the players:
1. Go to “Advanced Settings”.
2. In “Colors”, select the player to edit (A or B).
3. Choose the color you want for your player.

 [General] What is Cross DJ?
Cross DJ is the best pro DJ app on iOS. It allows you to mix tracks in perfect sync on a powerful audio engine. Cross DJ has been engineered by Mixvibes, digital DJing pioneer for 15 years.

 [General] Which iOS devices is Cross DJ compatible with?
Here is the list of Cross DJ’s supported devices: iPhone 4S, iPhone 5, iPhone 5C, iPhone 5S, iPhone 6, iPhone 6+, iPhone 6S, iPhone Plus, iPhone 7, iPhone 7+, iPad 2, iPad 3, iPad 4, iPad Mini, iPad Mini 2, iPad Mini 3, iPad Mini 4, iPad Air, iPad Air 2, iPad Pro, iPod Touch 5G, iPod Touch 6G

 [General] Which iOS versions is Cross DJ compatible with?
Cross DJ is compatible with iOS 7.0 and up.

 [General] Why can’t I access the vertical view?
By default, Cross DJ runs in landscape mode. So if a lock rotation is detected, you will have the landscape view automatically. If you wish to change this:
1. Quit the app.
2. In the settings of your device, turn the automatic rotation on.
3. Start the app again.

 [Import/Export] How do I export mixes?
To export a mix, you can directly use the “Share” button or you can export it to your computer using iTunes. To do so:
1. Connect your device to iTunes.
2. In the “Apps” tab of your device, scroll down to “File Sharing”.
3. You will find your recordings in the “Cross DJ” directory.

 [Import/Export] What are the possible extensions of the tracks I want to import?
The supported formats for the import of tracks are all the supported by iTunes (MP3, MPEG4 Audio (AAC), AIFF, WAV, Apple Lossless and WMA)

 [Import/Export] What format will the exported tracks be in?
With Cross DJ, your mixes will always be recorded in MP4 (AAC) format.

 [Import/Export] What kind of file formats can I import in Cross DJ?
The supported formats for the import of tracks are the following: MP3, AAC, FLAC, WAV, OGG and WMA.

 [Import/Export] What will be the extension of the files I export?
With Cross DJ, your mixes will always be recorded in MP4 (AAC) format.

 [MIDI] How can I get a powered USB hub?
You can purchase a powered USB hub in a store or on Internet. For example: http://www.amazon.com/Belkin-Hi-Speed-USB-7-Port-Lighted/dp/B000SDW84K

 [MIDI] How can I i connect my MIDI controller to the app?
– Your controller needs to be powered by a power supply if available, or by a powered USB hub.
– If using a powered USB hub, you need an USB cable between the hub and the controller and another between the hub and the device.
– To plug an USB cable to the device, use a Camera Connection Kit (choose the correct one, 30-pin or lightning).

 [MIDI] Which MIDI controllers is Cross DJ iOS compatible with?
There are 15 controllers compatible with Cross DJ on iOS:
– Hercules DJ Console RMX2
– Hercules DJ Control Air
– Hercules DJ Control Instinct
– MixVibes U-Mix Control
– MixVibes U-Mix Control 2
– MixVibes U-Mix Control Pro
– MixVibes U-Mix Control Pro 2
– Numark iDJ Live
– Numark iDJ Live II
– Numark MixTrack Pro
– Numark Mixtrack Pro 2
– Pioneer DDJ SB
– Pioneer Wego
– Pioneer Wego 2
– Vestax Spin 2

 [MIDI] Why is there no sound coming from my device when connecting controller?
When connecting a USB controller with audio outputs, iOS automatically roots the audio signal to this external output. The sound now comes from controller outputs.

 [Pre-Cueing] How can I get a split cable?
You can purchase a split cable in a store or via a website. For example: http://www.amazon.com/STEREO-3-5mm-PHONE-1-TIP-1-RING/dp/B000068O5E/ref=sr_1_11?s=electronics&ie=UTF8&qid=1436346301&sr=1-11&keywords=split+mono+cable

 [Pre-Cueing] How do I use Pre-Cueing?
If you are using the free version of Cross DJ, you first need to purchase the “External Audio Connection” in-app to pre-Cue your mix with headphones. This feature is included in the full version.
1. Plug your split cable:
2. Go to the advanced settings and set the “Audio Output Mode” to “Split” if you use a split cable or to “Dual” if you use an external soundcard.
3. Go to the “Settings” pannel and use the “Mix-Cue” button to set what you want to hear in your headphones (Mix is the master, Cue is the track you selected).
4. Go to the EQs pannel and press the little headphone logo of the track you want to pre-Cue.

 [Pre-Cueing] Split Cable
You can purchase a split cable in a store or via a website. For example: http://www.amazon.com/STEREO-3-5mm-PHONE-1-TIP-1-RING/dp/B000068O5E/ref=sr_1_11?s=electronics&ie=UTF8&qid=1436346301&sr=1-11&keywords=split+mono+cable

 [Pre-Cueing] What is Pre-Cueing?
The “Pre-Cueing” feature allows you to preview songs through headphones independently from the mix that goes through the main speakers.

 [Pre-Cueing] Why is my split cable not working?
Make sure that what you have is a Stereo to Mono Splitter and not a DJ Split Mono cable.
– a Stereo to Mono Splitter sends the left channel on output 1 (duplicated on left and right) and the right channel on output 2 (duplicated on left and right).
– a DJ Split Mono cable is a 1 Stereo to 2 Stereo Splitter. This only duplicates the stereo signal on both outputs.
For more help: http://forum.mixvibes.com/viewtopic.php?f=395&t=31305

 [Recordings] How do I rename or delete a recorded mix?
To rename or delete a mix you recorded, go to Settings. Then, tap on the three bars by the “Record” button and select your mix.
– If you want to rename it, choose “Edit” and tap on its name
– If you want to delete it, tap on “Delete”.
 [Recordings] How do I share my mixes?
To share do so:
1. Go to Settings.
2. Tap on the three bars by the “Record” button.
3. Select the mix you want to share.
4. Tap on “Share” and choose where you want to share it.

 [Recordings] How do I share my recordings?
If you want to share a mix you recorded:
1. Go to Settings.
2. Tap on the three bars by the “Record” button.
3. Select the mix you want to share.
4. Tap on “Share” and choose the sharing platform.

 [Recordings] Where can I find my recorded mixes?
To find the list of the mixes you recorded:
1. Go to Settings.
2. Tap on the three bars by the “Record” button.

 [Recordings] Why am I facing recording problems?
– If you are using the free version of Cross DJ, you will have to buy the in-app “Recording”. This feature is included in the full version.
To manually retrieve your mixes:
1. Connect your device to iTunes.
2. In the “Apps” tab of your device, scroll down to “File Sharing”.
3. You will find your recordings in the “Cross DJ” directory.

 [Recordings] Why can’t I upload my mix to Soundcloud?
You can face difficulties when uploading a mix to Soundcloud. There can be various reasons:
– Copyright infringement with the music used in your miw: please check the terms and conditions of use of Soundcloud here: https://soundcloud.com/pages/copyright
– Try again to upload your mix without cover (covers can sometimes be too heavy)

 [Recordings] Why can’t I upload my mix to Soundcloud?
You can face difficulties when uploading a mix to Soundcloud. There can be various reasons:
– Copyright infringement with the music used in your miw: please check the terms and conditions of use of Soundcloud here: https://soundcloud.com/pages/copyright
– Try again to upload your mix without cover (covers can sometimes be too heavy)

 [Samples] Can I add my own samples to Cross DJ?
The app provides no way to do this. However, we have a topic on our forum about it. Check it on http://forum.mixvibes.com/viewtopic.php?f=395&t=33440

 [Samples] Can I record samples?
Yes, to do so:
1. Open the Samples’ tab.
2. Tap on “Rec” next to the Samples’ tab button to start recording.
A new samples’ bank has been created.
3. Tap a pad when you want to save a sample.
4. The recording is still on so you can directly tap another pad to save another sample.
5. When you are done recording, tap again on “Rec”.

 [Samples] How do I move, rename or delete a sample?
To move, rename or delete a sample:
1. Open the Samples’ tab.
2. Tap on “Edit” next to the Samples’ tab button.
– To rename a sample, tap on its name.
– To delete a sample, tap on the X on it.
– To move a sample, tap on its top left corner and drag it onto another sample.
3. When you are done recording, tap again on “Edit”.

 [Samples] How do I quantize my samples?
To add quantization to your samples:
1. Go to “Advanced Settings”.
2. In “General Options”, select “Quantize”
3. Choose the quantization you want for your samples.

 [Tips] How can I easily reset the value of a slider or a knob?
To reset the value of a slider or a knob, just double-tap it.

 [Tips] How can I make a roll effect?
To make a roll effect:
1. Go to the FX tab and tap on “Slip”.
2. Press one of the “Beat repeat” pads.
3. Swipe to the others “Beat repeat” pads to decrease or increase the number of beats to be repeated.

 [Tips] How can I retrieve In-App Purchases I previously bought?
If you lost your In-App Purchases or if you are asked to pay for In-App Purchases you already paid for:
1. Make sure you are connected to the Internet, and that you are logged-in with the Play Store account that you used to buy the In-App Purchases.
2. Open the Store inside Cross DJ Free.
3. Tap the “Restore” button (top left).
4. If this doesn’t work, you would likely need to “buy” these IAPs again. As long as you are connected with the same account, you won’t be charged again for them.

 [Tips] How do I close Cross Dj?
To close Cross DJ, double tap the home button then swipe it up, just like any other app.

 [Tips] What does “Keylock” mean?
The “Keylock” feature allows you to fix the pitch of a track while altering the tempo. For example, the tune won’t go deeper if you slow it down.

 [Tips] What does “Quantize” mean?
Quantize your samples to be sure they start and end on the beat.

 [Tips] What is the “Beatmatcher”?
The “Beatmatcher” feature allows you to see the alignment of the track’s beats. It can be visible when clicking on the top center button.

 [Tips] What is the use of the “Keylock” feature?
The “Keylock” feature allows you to fix the pitch of a track while altering the tempo. For example, the tune won’t go deeper if you slow it down.

 [Tips] What is the use of the “Quantize” feature?
Quantize your samples to be sure they start and end on the beat (in sync).

 [Tips] What should I do when I face performance issues?
If you are experiencing performance issues, try to:
– Close other apps running in background.
– Deactivate the Keylock and Quantize features if you do not use them.
– Pre-analyse your library (tap ‘Analyse’ in the library, top right). It’s a CPU intensive task, and it’s better if done before you start your mix.
– Turn Wi-Fi / Bluetooth off to save battery.

 [Tracks] Can I sort my library by key or by BPM?
Yes, you can:
1. Go to your library.
2. On the top right, next to “Analyze”, tap on “Title”.
3. Above your tracks’ list, select the parameter you want to sort your library by (Title, Artist, BPM, Key, Duration)

 [Tracks] How do I rate tracks & playlists?
On IOS, you can’t rate tracks or create playlists directly inside the app. However, you can create a playlist with your device music player that will be used inside the app.

 [Tracks] Why can’t I find some of my tracks?
Sometimes, when a new media is added to an Android device (an SD card for instance), the tracks are not detected right away.
To find your tracks manually, go to the Folders tab and press the scan button (do not do this on a root directory because it will scan every sub directories and every files and it can take a very long time).

 [Tracks] Why can’t I seek on a track or load a track?
It seems you have the “Protection” mode on. To deactivate it:
1. Go to Settings and select Advanced Settings
2. Turn off the “Protection (Seek and Load)” parameter.